Skip to main content


Mini-Multi Interface Box Simulator

Multi-interface, portable, small-sized and programmable in Python device to facilitate testing and simulations of avionics. It allows you to emulate or read the main protocols of on-board aeronautical systems: ARINC-429, MIL-1553, AFDX o CAN.

Simulates, converts and tests ARINC-429, MIL-1553, AFDX or CAN interfaces with a single programmable device in Python.

Simulates inputs and outputs of any avionics equipment or on-board system

Programmable, both in python and with a simple and intuitive graphical interface

Interfaces ARINC-429, MIL-1553, AFDX, CAN, RS-422 and analog and digital I/O

Execution and analysis of tests and simulations remotely

Several test and simulation systems into a sigle system

Reduce time and cost, accelerating the go to market

All simulations on a single device

Save time and money on your ARINC-429, MIL-STD-1553, AFDX or CAN simulations. Unify avionics testing with a single device programmable in Python.

A test bench in portable format

Don't rely on huge, complex aviation test benches. Perform aeronautical tests easily with small, portable, multi-interface equipment.

Reading, converting and simulating interfaces

Performs comprehensive avionics and electronics testing. Read, record, convert or simulate inputs and outputs with the main aeronautical protocols.

Save time and money by unifying your avionics tests and simulations

Ground tests in aeronautics

Ground tests on aircraft without the need for large equipment or facilities.

Simulation of aeronautical interfaces

Programmable simulations in Python for ARINC-429, MIL-1553, AFDX or CAN.

Avionics systems tests

Tests and simulations of on-board equipment, unifying all tests in a single device.

Simulation of real situations

Simulations of real situations with simulated inputs and outputs in a test environment.



  • 1x MIL-STD-1553 dual redundant bus (bus A, bus B).

  • 8x ARINC 429 Tx & Rx channels

  • 2x CAN Bus

  • 1x Redundant AFDX

  • 1x Serial RS-422 up to 4Mbps

  • 8x Analog Inputs (±10v, 1MSPS). 8x Single-ended/4x Differential

  • 4x Analog Outputs (±10v) with RVDT capabilities

  • 8x Discrete Outputs (28V/OPEN, OPEN/GND)

  • 8x Discrete Inputs (28V/OPEN, OPEN/GND)


  • MIL-DTL-38999 III: ARINC 429, MIL-STD-1553, CAN Bus, RS-422

  • MIL-DTL-38999 III: Analog Inputs/Outputs, Discrete Inputs/Outputs

  • 2x RJ-45: AFDX, HMI

  • 4x USB type A: USB

  • USB type B: Host

  • HDMI: HDMI output


  • Size:

    140 x 150 x 135 mm

  • Weight:

    1650 ± 5 g

  • Boxing:

    Aluminio anodizado

  • Protection:


Top view

Front view

Rear view

Configure simulations, conversions, and test avionics interfaces using Python or a simple graphical interface.

Do you need more information?

+34 955 26 03 04
This email address is being protected from spambots. You need JavaScript enabled to view it.

C/ Américo Vespucio, 5 Bloque 1
Local A 8-12 41092 Sevilla, (España)

Por favor, introduzca su nombre
Entrada no válida
Por favor, introduzca su email
Por favor, indique su teléfono
Por favor, escriba su mensaje
Skylife Engineering S. L. is an Andalusian company that develops technological innovation with a high specialization in aerospace engineering applied to the aviation industry and other sectors, with the aim of offering solutions with a positive impact on society.

Calle Américo Vespucio, 5 Bloque 1 Local A 8-12
41092 Sevilla (España)

+34 955 26 03 04
This email address is being protected from spambots. You need JavaScript enabled to view it.


Esta página web y sus publicaciones hace uso de ilustraciones e imágenes de bancos como FlaticonFreepik, Pixabay o Pexels.